If you own garage doors at home, you are aware of how practical and helpful it is. Like any mechanical device garage doors may experience problems that hinder their operation. The most common issue could result from a damaged cable. If the cable connected to the garage door is damaged it is crucial to take appropriate action to fix the issue to avoid any further harm.
In this blog, we’ll explain what you should do if the cable that runs through the garage door is damaged and how to deal with this problem safely and efficiently.

What is the function of cables?

Cables are a crucial component of a garage door’s system since they assist to raise and lower the door. The cables are connected to the bottom of the door and are then pushed through a set of pulleys before connecting to the opener’s electric motor. If the electric opener is turned on and the door is lifted, it does so by pulling the cables. The cables are in much tension and must be maintained to work effectively.
If you open and close your garage door, springs are utilized to counterbalance the door’s weight. Because the springs are exposed to a great deal of tension if they break they could cause severe injuries or even injury. This is the reason cables that have large weights are inserted into the springs to stop the springs from reinforcing.

The type of springs that are on the garage doors will decide what kind of cable you choose to use.

  • Lift Cables: Garages that have torsion springs are equipped with lift cables that run from the lower corners of the door over the torsion springs on the top of the door.
  • Retaining cables: Garage doors that have extension springs come with cables that keep the springs in position so that in the event that they break, they aren’t sent over the space. The cables are located inside the springs that are on the left and right sides of the door and are arranged horizontally.

The cables are an integral part of the garage door system as they aid in lifting and lowering the door. There are typically two cables in the garage door with one cable on each side. The cables are connected to the lower part of the door and then run through a chain of pulleys that connect to the opener’s electrical circuit. When the opener is turned on it raises the doors up by pulling the cables.

If you own garage doors at home, you are aware of how practical and helpful they are. Like any mechanical device, garage doors may experience problems that hinder their operation. The most common issue could result from a damaged cable. If the cable connected to the garage door is damaged, it is crucial to take appropriate action, such as seeking professional garage door repair, to fix the issue and avoid any further harm.

In this blog, we’ll explain what you should do if the cable that runs through the garage door is damaged and how to deal with this problem safely and efficiently.

What is the function of cables?

Cables are a crucial component of a garage door’s system since they assist to raise and lower the door. The cables are connected to the bottom of the door and are then pushed through a set of pulleys before connecting to the opener’s electric motor. If the electric opener is turned on and the door is lifted, it does so by pulling the cables. The cables are in much tension and must be maintained to work effectively.

If you open and close your garage door, springs are utilized to counterbalance the door’s weight. Because the springs are exposed to a great deal of tension if they break they could cause severe injuries or even injury. This is the reason cables that have large weights are inserted into the springs to stop the springs from reinforcing.

The type of springs that are on the garage doors will decide what kind of cable you choose to use.

The cables are an integral part of the garage door system as they aid in lifting and lowering the door. There are typically two cables in the garage door with one cable on each side. The cables are connected to the lower part of the door and then run through a chain of pulleys that connect to the opener’s electrical circuit. When the opener is turned on it raises the doors by pulling the cables.

The cables are in lots of tension, and they are attached to a drum which is a cylinder the cables are wrapped around. When the drum rotates the drum, it aids in raising up or down the doors. The cables are connected to the lower brackets on the door, and they hold the cables.

In certain instances, garage doors might include an additional cable, or two running from the brackets at the bottom up to the very top. These cables assist in supporting the door’s weight and help to keep it in balance.

It is essential to ensure that the cables on the garage door are well-lubricated and in good shape to keep them in good working order and to prevent breaking. If the cables are damaged or broken they could make the doors unbalanced and possibly fall in a way that could result in injuries or damage. If you are experiencing any issues with your garage door’s cable and you are concerned about them, it is recommended to get a professional in garage door repair to replace the cables.

If the cable is broken, can I still open the garage door?

It is strongly suggested that you do not use a garage door that’s cable is damaged or broken. This places a lot of stress on other cables, which may break, causing the door to collapse on the ground or on anyone who is beneath it.

If your garage door is not open due to a damaged cable, it is recommended to make an emergency call to repair garage door technicians and wait until they arrive. If that’s not possible and you are unable to keep your door open then you’ll need to cut off the cable to close the door.

If you choose to go this route, make sure there are three or four adults around to help assist you in cutting the wire and slowly lowering it down to the ground.

Some of the most common signs that garage door cables are broken or damaged are:

There are some typical indicators that your garage door’s cables could be damaged or damaged:

If you spot any of these indicators, it is crucial to address them promptly, especially concerning garage door repair, by getting the cables fixed or replaced as soon as you can. This helps avoid damage to the garage door and ensures it is suitable for use. If you’re uncomfortable handling cables, it’s advised to consult professionals for assistance.

Can I Fix the Garage Door Cable Myself?

An issue in your cable can be the result of a variety of factors, including:

Although you may be able to fix the broken cable for your garage door by yourself you should not. It is recommended to call an expert for repairs because they will perform the repair safely and won’t harm the door or any other components that move.

Furthermore, our Garage door repairs involve reviewing the overall performance of the door and identifying other possible issues before they become serious.

If your garage door isn’t open, here’s how to do:

If your garage’s doors have become stuck open, There are several things you can do to fix the problem:

  1. Examine to determine if you can verify that the garage door opener receiving electricity. Check to see if it is powered on as well as that your outlet is working.
  2. Examine the circuit breaker or fuse of your garage door’s opener. If the circuit is tripped or the fuse is blowing then change it or reset it if necessary.
  3. Make sure to check the security sensors. They are situated at the bottom of the frame of the door. They prevent the door from opening when there’s an obstruction that is in the way. Be sure that the sensors are properly aligned and free of any debris.
  4. Make sure the tracks and the rollers are in good condition. Check that the tracks are free of any debris and your rollers are in good shape.
  5. Make sure the springs are in good condition. If your garage door is locked, it may be caused by springs that are loose or broken. If you’re not comfortable dealing with springs it’s advised to consult professionals for assistance.

If you’ve tried these steps, but your garage door remains open, you should speak with a professional for more assistance with garage door repair. To secure your home and family members, you’ll need to remove the cable that is damaged to shut the door. Repairs we offer for cables consist of replacing both of the cables to protect them from damage. Cutting the original cable will not make a difference to the repair cost.

Take note: If you choose to cut the cable yourself, be extremely careful and ensure there are other people nearby to assist you in lowering your door slowly and carefully once the cable is cut.

Contact an expert Garage Door Company in Bryan, TX

Over the past century, Our team at Circle B Overhead Door has been the garage door business that has been the most popular choice in the repair of garage doors as well as the replacement of garage doors and garage maintenance for doors.

We also offer garage door openers and Keypad programming. The state is the top resource for all things garage-related.

BOOK ONLINE!